• Skip to primary navigation
  • Skip to content
  • Skip to footer
  • Getting Started
  • Documentation
  • Troubleshooting
  • UM Courses
  • About
    1. Home
    2. /
    3. Docs
    4. /
    5. Hardware
    6. /
    7. MBot Classic Hardware Documentation
    • Start Here
      • Getting Started
      • MBot Basics
    • Hardware
      • MBot Classic
        • Assembly
          • Bottom Plate
          • Middle Plate
          • Top Plate
          • Wiring
        • Building
      • MBot Omni
        • Assembly
        • Motor Cables
        • Building
      • MBot Control Board
    • Setup
      • Setting up a new MBot
        • Step 1: Installing the OS
        • Step 2: Configuring
        • Step 3: Calibration & Flashing
      • Flashing Firmware
      • Networking
      • Advanced: OS Image Setup
    • Tutorials
      • What's my MBot's IP?
      • Drive the MBot
      • Connecting with VSCode
      • Connecting with NoMachine
      • The MBot Bridge API
      • Mapping & Localization
      • MBot Command Line Tool
    • Troubleshooting
      • Common Problems
      • Hardware Problems
      • Software Problems
      • Networking Problems

    MBot Classic Hardware Documentation

    The MBot Classic is a differential drive robot with a Raspberry Pi 5.

    Ready to build your own MBot Classic? If you have all the parts, head to the Assembly Guide to get started.

    Need to get the hardware? See our Building Guide for the design files and list of parts.

    Ready to start programming? See the Software Setup.

    Updated: August 23, 2024

    © 2026 The MBot Ecosystem. Powered by Jekyll & Minimal Mistakes.