Got a fully assembled MBot? You’re in the right place! Follow the guides below to help you get your robot ready to program.

Students: If you are a student in a class using the MBot, check with course staff before following these guides! Your instructors may have specific configurations you need to get your robot ready for the semester.

Need to build a robot? Your robot should be fully assembled before you set it up. See the Hardware Documentation for instructions on building your robot.

The guides in this section will help you:

  1. Install an image onto the MBot’s Raspberry Pi,
  2. Configure your MBot,
  3. Calibrate and flash the firmware onto the MBot Control Board.

Next Step: Install the OS